Nulon Stop Smoke (SS) has been specifically formulated to reduce exhaust smoke caused by burning oil. The two most common causes of oil burning are worn piston rings and worn and hard valve stem seals. Both are associated with normal wear and tear over an extended period of time. With stricter controls on exhaust emissions, motor vehicle owners have to be particularly aware of visible smoke.

Nulon Stop Smoke is a state-of-the-art sheer-stable, long-chain polymer which, when used according to the directions, increases the viscosity of the parent motor oil. The resultant increase in viscosity of the oil simply makes it more difficult for the oil to flow past the piston rings or the valve stem seals into the combustion chamber where, of course, it is burnt.

Nulon Stop Smoke is extremely sheer stable which means it does not lose its viscosity at elevated operating temperatures - a common symptom in worn engines.

Increasing the viscosity of the oil has the benefit of reducing undesirable engine noises so typical of worn engines, such as noisy timing chains, piston slap and gudgeon noise.

The special long-chain polymer technology used in the formulation of Nulon Stop Smoke is long lasting, which means it lasts the life of good quality oil, unlike many competitive products.

Nulon Stop Smoke represents excellent value for money as it is probably the largest container on the market and for typical four-cylinder engines half of one bottle is adequate treatment. 

Nulon Stop Smoke is suitable for use in petrol, diesel and LP gas engines. The long-chain polymer viscosity improving characteristic ensures an improved seal between pistons, rings and cylinder walls, which produces optimum cylinder pressures. 

Benefits:

• Reduces exhaust smoke
• Reduces oil loss and oil burning
• Reduces spark plugs fouling
• Boosts oil pressure
• Boosts cylinder compression
• Quietens engine noise

TIP: To reduce blue smoke on start-up or when decelerating, use Nulon Engine Stop Leak.

Note: If exhaust smoke continues after treatment, it indicates excessive engine wear or previous engine damage has occurred. Seek mechanical advice.  

Directions for Use: Add contents to engine oil when engine is at normal operating temperature. Can be added at any time or use each oil change. For 4 cylinder engines, use half bottle. For 6 and 8 cylinder engines, use full bottle.

Warning :Do not exceed 10% treatment level in sump oil, i.e. for 4 litre sump capacity use maximum 400 ml of Stop Smoke.

First Aid: For advice, contact a Poisons Information Centre (Phone e.g. Australia 131 126; New Zealand 0800 764 766) or a doctor (at once).

Packaging:

500 ml bottles (6 per carton) Part No: SS

• MSDS

  Download MSDS

• Images

• PDF Product Bulletin

  Stop Smoke