Power Steering Stop Leak and Conditioner

Power Steering Stop Leak and ConditionerPart No:G65
Nulon Power Steering Stop Leak & Conditioner (G65) incorporates state-of-the-art seal rejuvenating chemicals and high performance anti-wear agents. G65 prevents premature wear of components and reduces messy oil leaks from hard and worn seals.

Nulon Power Steering Stop Leak & Conditioner (G65) uses the latest seal rejuvenating and high performance anti-wear additives. It reduces and prevents messy oil leaks and premature wear to extend power steering component life. Compatible with most types of power steering fluid.

Generally speaking, power steering systems are very much neglected and receive virtually no maintenance other than to check the fluid level occasionally. Most people are not aware that a power steering system has a simple filter located in the fluid reservoir that needs cleaning from time to time. A typical system contains a small volume of power steering fluid which is subjected to quite harsh conditions, particularly heat and contamination.

As preventative maintenance Nulon G65 will improve the lubricating qualities of the fluid and will keep seals soft and flexible.

Many vehicles suffer from pump noise and others suffer from a vibration that feeds back to the steering wheel. In many instances G65 will eliminate these annoying symptoms.

To replace the seal is a very expensive exercise, Nulon G65 will in most cases either eliminate the leak or at least reduce it to an acceptable level.

Benefits:

  • Reduces leaks fast
  • Helps prevent seal damage & wear
  • Extends power steering component life
  • Reduces noise & steering chatter
  • Rejuvenates worn & hardened seals

Directions for Use: Simply add to the power steering system reservoir. As the bottle of G65 contains 300 ml it is usually necessary to remove an appropriate amount of fluid from the reservoir prior to adding G65. It is also good practice to clean the filter at the same time. Repeat application when necessary, or when the system is serviced.

Note: Some vehicle manufacturers specify their own particular power steering fluid instead of the usual automatic transmission fluid. In such instances mix a small amount of G65 with the specified fluid and visually check for compatibility.

 

Typical Properties:

Tests

ASTM

Nulon G65

Colour

Visual

Red

Flash point, COC, ºC

D92

134

Foam characteristics

D892

Nil foam

Viscosity @ 40°C, cSt

D445

47.42

Viscosity @ 100°C, cSt

D445

8.540

Viscosity index

D2270

159

Density, Kg/L

D1298

0.8842

Pour point, ºC

D97

-45

Melting point of PTFE, ºC

D1457

>325

 

First Aid: For advice, contact a Poisons Information Centre (Phone e.g. Australia 131 126; New Zealand 0800 764 766) or a doctor (at once).

Packaging:

300 ml bottles (6 per carton) Part No. G65