Nulon Petrol Injector Cleaner (PIC) is the result of extensive research into the fuel requirements of modern petrol-powered engines, particularly those operating on unleaded fuels.

Fuel injectors provide controlled fuel delivery system to the combustion chamber resulting in optimum engine performance and fuel efficiency. Low quality fuel and stop start driving conditions form deposits on fuel injectors which negatively affect fuel spray pattern and lead to poor vehicle performance.

Constant stop start driving lead to unburnt fuel within the engine and resulting in build up of carbon deposits within the combustion chamber. This leads to increased compression ratios, causing problems associated with the use of low-octane fuels. The motorist suffers from the car's poor running and low fuel economy. Carbon deposits also build up on fuel injectors and inlet valves causing poor atomisation of the fuel, leading to starting problems, poor running and expense to the motorist.

Major oil companies and chemical companies associated with the industry were forced to produce detergent-type additives for unleaded fuels to minimise the above-mentioned problems. These products are now added to fuels but, unfortunately, at a minimum level because of the additional cost, and because the oil companies have been able to create lucrative after-market sales of such additives by carefully minimising the amount added to the petrol we buy at the pump. They then advertise the need to use such additives to ensure trouble free engine operation. Although many of these additives are available on the market, Nulon has taken the time to carefully evaluate both engine and consumer requirements carefully to ensure maximum protection level at a minimal cost.

Nulon Petrol Injector Cleaner is a powerful chemical cleaner that helps clean your fuel injection or carburetor system fast. Nulon helps to eliminate hard starting, rough running, flat spots on acceleration and poor performance. When used according to directions, Nulon Petrol Injector Cleaner will ensure optimum efficiency at minimal expense.

Nulon Petrol Injector Cleaner is safe to use in all unleaded petrol including E10.

Benefits:

• Cleans fuel injectors & carburettors in one tankful
• Cleans intake valve deposits for easier starting
• Safe for catalytic converters & oxygen sensors
• Restores fuel economy
• Improves performance & acceleration
• Reduces environmentally dangerous emissions
• One 300ml bottle treats 150 litres of petrol

Directions for use:

For normal cleaning - add 100ml per 50 litres of fuel, prior to filling. If the system is very fouled or dirty, doubling the treat rate will provide a quicker cleaning result, if required. To keep the system clean use once every 2,500 km.

Note: Over-treatment will not cause damage.

Safety Directions: Avoid contact with eyes or skin. DO NOT SWALLOW. Keep out of reach of children. Combustible. Keep away from heat or flame. Do not breathe vapour. Wash hands thoroughly after use. Not to be used as a food container.

First Aid: For advice, contact a Poisons Information Centre (Phone e.g. Australia 131 126; New Zealand 0800 764 766) or a doctor (at once). If swallowed, do NOT induce vomiting. If in eyes, hold eyelids apart and flush the eye continuously with running water. If skin contact occurs, flush with running water.

Packaging:

300 ml bottle (6 per carton) Part No: PIC

500 ml bottle (6 per carton) Part No: PIC-500

20 litre drums (single unit) Part No: PIC-20

• MSDS

  Download MSDS

• Images

• PDF Product Bulletin

  Petrol Injector Cleaner