Nulon Trade Strength Oil System Cleaner is formulated to safely dissolve and dislodge sludge, carbon deposits and other harmful combustion by-products that accumulate within an engine's lubrication system during normal operation.

Unleaded petrol, very much higher operating temperatures, increased power output and extended oil change intervals all contribute to oxidation and sludge formation. As a result, engine oils have more to cope with and are under much more stress than ever before. Built-up engine deposits are the greatest cause of failure in modern engines.

Environmental pressure and consumer demand have brought about extended oil change intervals. Manufacturer recommended oil change intervals are for vehicles that operate under ideal conditions. Few vehicles operate under such conditions, which means that the oil's additives degrade quicker, hence the oil should be changed more frequently. However, this does not happen and increased sludge and carbon forms as a result.

It makes absolutely no sense to add clean oil to a dirty engine. When added to the crankcase prior to an oil and filter change, Nulon Trade Strength Oil System Cleaner greatly assists in ridding the engine of potentially damaging contaminants. Nulon Oil System Cleaner also helps to free sticky hydraulic valve lifters. Thermal efficiency of the engine is also improved by ridding the engine of insulating sludge build-up. Oil System Cleaner provides a cleaner environment for fresh oil to operate in, so the detergent, dispersant and anti-oxidant additives in the new oil are not depleted as quickly.

Caution
Do not use this product in an engine that is known to have excessive sludge and carbon build-up. Carbon particles flushed from the top of the engine into the sump may not drain out. In such cases the oil pick-up will be heavily contaminated and picking up the extra loose carbon which may block the pick-up completely.

Benefits:

• Dissolves sludge in oil strainer screens
• Safely cleans soft carbon and sludge
• Helps free-up sticky piston rings
• Provides a cleaner environment for new engine oil, when used as directed
• New oil stays cleaner for longer

Features:

• Suitable for petrol, gas and diesel engines
• Safe to use in older engines
• Will not harm oil seals or gaskets

Directions for Use:
Add to engine crankcase oil immediately prior to an oil change. Run the engine at idle for 15 to 30 minutes. Stop the engine and drain the oil while warm. Install new oil and filter.

Application Rates:
Add one 450 ml can of Nulon Trade Strength Oil System Cleaner for every 5 litres or part thereof of engine oil.

Warning:
Keep out of reach of children. Avoid contact with skin and eyes. Avoid contact with used oil.

First Aid Directions:
For advice contact a Poisons Information Centre (Phone Australia 131 126; New Zealand 0800 764 766) or contact a doctor at once. If swallowed, do NOT induce vomiting. Not to be used as a food container.

Packaging:
450 ml can (6 cans per carton) * Part No. WOS

• MSDS

  Download MSDS

• Images

• PDF Product Bulletin

  Oil System Cleaner